40 位置 双排 表面贴装 直角 1.27 mm 间距 插头

板对板与夹层连接器 REC VERT 40P 1.27MM

板对板与夹层连接器 REC VERT 80P 1.27MM

Conn Micro High Speed Socket Strip SKT 38POS 0.64mm Solder ST Thru-Hole/SMD

Conn Micro High Speed Terminal Strip HDR 76POS 0.64mm Solder ST Thru-Hole/SMD

3M N3431-L202RB Wire-To-Board Connector, Short Latch, 2.54mm, 68Contacts, Header, Through Hole, 4Rows

Conn Ejector Header HDR 80POS 2.54mm Solder RA Thru-Hole

Hirose 2.54mm HIF3FB 和 HIF3FC 系列薄型印刷电路板引脚管座 HIF3FB 和 HIF3FC 系列 2.54mm 薄型直角和垂直印刷电路板有罩引脚管座连接器由黑色 UL94V-0 PBT 制成，带局部镀金触点。 垂直型号还采用防磁通泄漏设计。 这些 HIF3FB 和 HIF3FC 系列有罩印刷电路板管座具有 9.2mm 的薄型高度和 12.2mm 的板对板间隙，用于堆叠连接。 这些 HIF3F 薄型有罩印刷电路板管座的典型应用包括计算机、终端设备、电子设备和办公自动化设备。 ### Hirose 2.54mm HIF3 系列线对板和板对板连接器

集管和线壳 BOARDMT HDR 40 POS

Conn Ejector Header HDR 40POS 2.54mm Solder ST SMD

C-Grid III 系列单排和双排直向分离式引脚管座。 这些 C-Grid II 引脚管座有多种镀层组合。 ### 2.54mm Molex C-Grid III 系列 技术规格 --- 最大额定电流 (A) | 3 最大工作电压（V 交流/直流） | 350 绝缘电阻 MΩ | >1000 最大触点电阻 (mΩ) | 20 触点镀层 | 局部镀金镍 绝缘材料管座： | 15% 纤维填充聚酯 (PBT) 外壳： | 聚苯醚 管座引脚规格 (mm) | 0.64 平方 建议 PCB 孔直径尺寸 (mm) | 1

Conn Wire to Board PIN 19POS 5.08mm Solder RA Thru-Hole

高速对接连接器固定 HIGH SPEED DOCKING FIXED CONNECTOR

Conn Wire to Board HDR 24POS 4.2mm Solder ST Thru-Hole Tray

7.50毫米（ 0.295 “ ）间距佩剑™头，单排，直角， 4个电路， PCB焊脚长度3.81毫米（ .150 ” ） ，与卡入式金属针，锡（Sn ）镀层 7.50mm (.295") Pitch Sabre™ Header, Single Row, Right Angle, 4 Circuits, PC Tail Length 3.81mm (.150"), with Snap-In Metal Pins, Tin (Sn) Plating

Conn Micro High Speed Socket Strip SKT 16Power/52Signal POS 0.635mm Solder RA Thru-Hole/SMD

Conn Micro High Speed Socket Strip SKT 8Power/104Signal POS Solder RA Thru-Hole/SMD

Conn Micro High Speed Socket Strip SKT 104POS Solder RA Thru-Hole/SMD

Conn Differential Pair SKT 8Power/32Signal POS 0.635mm Solder ST SMD Tray

Conn Micro High Speed Socket Strip SKT 156POS 0.635mm Solder RA Thru-Hole/SMD

Conn Micro High Speed Socket Strip SKT 156POS 0.635mm Solder ST SMD

Conn Differential Pair HDR 64POS 0.635mm Solder ST SMD

Conn Micro High Speed Terminal Strip HDR 8Power/104Signal POS Solder ST SMD/Thru-Hole

Conn Micro High Speed Terminal Strip HDR 208POS 0.635mm Solder ST SMD

Conn Micro High Speed Terminal Strip HDR 156POS 0.635mm Solder RA Thru-Hole/SMD

Conn Differential Pair HDR 8Power/96Signal POS Solder ST Thru-Hole/SMD

Conn Differential Pair HDR 32POS 0.63mm Solder ST SMD

Conn Micro High Speed Terminal Strip HDR 208POS 0.635mm Solder ST SMD

QRM8 Series Slim Body Ground Plane Headers These Board to Board QRM8 Series connectors have 0.25 μm Gold plated contacts with Tin plated Tails. This range of Board to Board QRM8 Series connectors are available: with and without Guide Posts, straight or right angle, 2, 5 or 7 mm body heights. Alignment Pins are included in this rangeThe design of the Board to Board QRM8 Series connector includes samtec"s Edge Rate contacts. QRM8-xxx-**02.0**-x-x-x-xx have a Body height of 2 mm QRM8-xxx-**07.0**-x-x-x-xx have a Body height of 7 mm QRM8-xxx-xx.x-x-x-x-**GP** have Guide Posts QMR8-xxx-xx-x-**RA-GP** have a horizontal orientation with Guide Posts ### 注 Mates with QRF8 Series Sockets see stock number 767-7082 typical. Guide Post versions require Guide Post mating articles. ### 0.8mm 板对板 - Samtec 兼容性表 --- 系列名称 | 配接对象 BSE | BTE CLE | FTE QSE | QTE ERF8 | ERM8 QRF8 | QRM8 额定电流 | BSE、BTE、QTE 和 QSE 系列：2A CLE 和 FTE 系列：0.75A ---|--- 触点材料 | BSE、BTE、QTE、QSE 和 FTE 系列：磷青铜 CLE 系列：铍铜 触点电镀 | 金 工作温度范围 | -65°C → +125°C

Conn Socket Strip SKT 80POS 0.8mm Solder ST SMD